How to Paint with Pro Acryl Burnt Orange
By Frontline Gaming | Published: 2026-10-20
Category: How-to Guides
Learn step-by-step how to paint with Pro Acryl Burnt Orange from Monument Hobbies. Get great coverage, thin consistency, and a matte finish on your miniatures.
Quick Answer
Thin Pro Acryl Burnt Orange slightly with water or medium, apply in thin layers, and let each layer dry before the next to get a smooth, matte orange finish on your miniatures.
Why Pro Acryl Burnt Orange Works Well
Pro Acryl Burnt Orange is a high-density pigment paint that covers well straight from the bottle. Its matte finish reduces glare on your models, making details pop without extra varnish.
Because the paint is already formulated for airbrush and brush use, you can thin it to any transparency without losing color consistency. This makes it a versatile choice for basecoats, highlights, and glazes.
Common Challenge: Orange Coverage
Orange pigments can be translucent over dark primers. Pro Acryl Burnt Orange covers better than many orange paints, but you may still need two to three thin coats over black or dark grey primer.
For best results, start with a light grey or white primer, or apply a thin layer of a warm brown or ivory base coat before the orange. This reduces the number of coats and keeps the color vibrant.
Step-by-Step Guide
- 1. Prepare Your Paint: Shake the bottle well for about 30 seconds. Squeeze a small amount onto a wet palette or dry palette. Dip your brush in water, then mix a tiny drop of water into the paint on the palette. Aim for a consistency like skim milk—thin enough to flow off the brush but not watery. Common mistake: adding too much water. If the paint beads up on the model, it's too thin. Add a little more paint to thicken it.
- 2. Apply the First Thin Coat: Load your brush and wipe off excess on the rim of your water cup. Apply a thin, even layer over the area you want to paint. Don't worry if the coverage is patchy—that's normal. Let it dry completely for 1–2 minutes. Checkpoint: If the paint pools in recesses, your brush is too wet. Wipe more moisture off before the next stroke.
- 3. Build Up Layers: Apply a second thin coat, covering the same area. The color should start looking more solid. For a smooth finish, apply a third coat if needed. Each layer should be fully dry before the next. Common mistake: rushing and applying a thick coat. Thick coats hide detail and dry with visible brush strokes.
- 4. Add Highlights or Shading (Optional): Mix a tiny amount of white or ivory into the Pro Acryl Burnt Orange for highlights, or mix with a dark brown for shadows. Apply these as thin glazes or edge highlights. Because the paint thins evenly, you can create smooth transitions. Checkpoint: For glazes, thin the paint even more (almost like colored water) and wick off excess on a paper towel before applying.
- 5. Seal the Finish: Once the orange layers are dry, apply a matte varnish if desired. The paint's natural matte finish may be enough, but varnish protects the paint from wear during handling and gaming. Common mistake: forgetting to let the paint cure for at least 24 hours before varnishing. Fresh paint can react with spray varnish and become cloudy.
Product Details
- Pro Acryl Burnt Orange: All Monument paints are a premium high-density pigment in superior acrylic mediums. They provide great coverage right out of the bottle, thin evenly to achieve any level of transparency, and dry to a beautiful matte finish. This means you can use Pro Acryl Burnt Orange for both opaque basecoats and transparent glazes without switching paints.
Pro Acryl Burnt Orange
